Telemetry is a vast subject and it is for different areas: safety oversight of nuclear power plants, the migration habits of the species endangered. And 'generally used in large projects such as power plants, water control and waste water treatment plants, and its versatility offers many possibilities in the private sector to find. Thanks to advances in technology, telemetry has been used successfully in chemical and food industry, which used to be a challenge to the pastStainless steel and cement interfere with some radio signals.
Measurement of physical and chemical parameters in the tanks are areas where telemetry has huge applicability. Because of the variety of configurations, there is no one size fits all solution. When shopping for the best telemetry system for your specific business needs, must have been a clear idea of your needs. There are seven key elements involved in the implementation of the system, if youclarify your needs in these seven points, it is very easy to choose the correct configuration:
Belkin Wireless Router
Sensor / hardware optimization: The sensors will be used will be influenced by the nature of the substance in the tank. It is not the same, are hydrogen, fuel oil or syrup. To take note of what is in the tank.
Sensor Integration: Depending on what you want to measure the sensor and the shape of the tank, put the best position for changing them. You must also specify whether youthe system for a single tank or multiple tanks. The main options for the location of the site are:
Flow meter: in or out Bottom: differential pressure Top: ultrasound or contact Contact: High, Low or overflow
Form of communication / signal: The best form of communication will be determined by the position of features and accessibility of the signal. The two major groups are short-range wireless connection or a long-range wireless connection.
ShortSeries: If the tank is close to a LAN (Local Area Network) or WAN (Wide Area Network), you can use a low-energy. Some options are available: Protocol 802.xx, Wi-Fi and short-range RF. Which is best depends on the presence of obstacles in the signal path of radio waves and aspiration.
Long hand: is the tank in a remote place or the short-range signals are recorded, are just some of the possibilities of digital mobile technology (GPRS / CDMA), analog cellular,Satellite or a combination thereof.
Power: The communication devices need power to operate. Possible if the tank is in place, pay attention to the strength and configuration to see if wiring or if you need a battery. If the tank is located in a remote location, you can use a battery or solar charged you might have.
Communication frequency / signal direction: the optimal frequency of communication is to analyze the nature of the desired data and to store andIf you want to perform actions or not. If you use telemetry to transmit data to a central hub to the safety analysis, then you need a two-way communication. If you have the system able to respond to certain signals and to make changes (opening / closing a valve, for example), you need two-way communication.
Once you have one or two-way communication, there is the actual frequency. Some of the options are: continuous, minutely, hourly, daily,Month or alarm is activated (usually high or low).
The frequency of communication and direction signal to influence the choice of transmitter and receiver hardware and to some extent the management software used or developed specifically for you.
Storage and information management: If you have a Lanor WAM, you can save and run the analysis of the information on your network. In this case, at least one of the computers on the network will be dedicated to this project, andReceiver hardware will be connected with him. If on the other hand, people from different geographical areas need access to information, then you could opt for a hosted solution. Hosted solutions allow 24-7 access via the Internet, is independent of position.
Budget: There are hardware selection in different price ranges. As a general rule, the lower the up-front costs are the major long-term costs. The total project cost will be given bySame hardware, installation, equipment life and lower maintenance costs.
These are the seven key elements to analyze when looking for a telemetry system for your business needs. If you are looking for a service provider with this information at hand, research is much more efficient and you will be able to make informed decisions faster.
Telemetry - As The telemetry system is right for your business needs, choosebelkin wireless router g
